[3 CON] (KG1) Điện Trở Nhiệt NTC 47D-15
Giá bán :
14,800
Mô tả :
Điện Trở Nhiệt NTC 47D-15Mô tả: Thông số kỹ thuật: Datasheet: Application: Inrush current limiting in a switching power supplyVarious switch-mode pow
Người bán | Điện tử Minh Nguyên CHIPN24 |
---|---|
Thương hiệu | No Brand |
Mã sản phẩm | 4028_28445438 |
Danh mục | Tân Trang Nhà Cửa Linh kiện điện tử Điện trở |
Tình trạng | Còn hàng |
[3 CON] (KG1) Điện Trở Nhiệt NTC 47D-15
CHI TIẾT SẢN PHẨM
Điện Trở Nhiệt NTC 47D-15
Mô tả:
Thông số kỹ thuật:
Datasheet: Application: Inrush current limiting in a switching power supply
Various switch-mode power supplies (SMPS) - which are small, lightweight, and high-performance - are often used as power supplies of electronic devices. At the time of powering on an SMPS, the device is charged with an inrush current with a high peak to charge a smoothing capacitor. Because this inrush current may negatively impact the service life of the capacitor, damage the contacts of the power switch, or destroy a rectifier diode, it is necessary to take countermeasures.
As shown in the figure below, limiting the inrush current of an SMPS by inserting an NTC thermistor is widely used as a way of making a low-cost and easy circuit for limiting inrush currents in power supplies. The same result can be achieved even when the NTC thermistor is connected after the rectifier circuit.
Figure 1 Inrush current limiting in a switch-mode power supply
Application: Inrush current limiting in an AC-DC power module
A built-in power supply with various power circuits and peripheral circuits compactly integrated is called a power module. An AC-DC power module is a power supply constructed by combining an AC-DC rectifier circuit and a DC-DC converter, and with a small quantity of external parts, it can realize a space-saving optimized power supply system. An inrush current applied to input and output capacitors at the time of powering on can be effectively limited by inserting an NTC thermistor (power thermistor).
Figure 2 Inrush current limiting in an AC-DC power module
Application: Inrush current limiting in a DC-DC converter
In the DC power circuit of a DC-DC converter or the like, an NTC thermistor is used as a power thermistor and effectively limits an inrush current, with which the input and output capacitors are charged at the time of powering on. The resistance of the NTC thermistor becomes very low after it is energized, which achieves a power loss that is lower than when a fixed resistance is used.
Figure 3 Inrush current limiting in a DC-DC converter
Application: Inrush current limiting in an industrial inverter
Induction motors are often used for fans, pumps, air conditioners, and others in factories, large facilities, office buildings, and the likes. An induction motor is simple in structure and stable, however, its rotation speed is dependent on the frequency. Inverters are needed in order to control the rotation speed. Motors equipped with inverters are known as variable speed drives (VSD), which are able to significantly reduce power consumption.An inverter system consists of a converter part, an inverter part, and a DC link capacitor (smoothing capacitor) that is placed after the converter part. At the time of powering on, the device is charged with an inrush current of whichwhose peak is several times as large aslarger than that of steady current to charge the DC link capacitor. This inrush current may have a harmful effect on the service life of a DC capacitor or destroy a semiconductor device. To protect against the inrush current, NTC thermistors (power thermistors) are connected.
Figure 4 Inrush current limiting in an industrial inverter (three-phase)
Figure 5 Inrush current limiting in an industrial inverter (single-phase)
1) Quý khách cần có những kiến thức cơ bản về Điện tử (Phân biệt được 1 số linh kiện cơ bản, chiều cắm của Linh kiện (nếu có)).2) Đối với Bo mạch hoặc Module: Vui lòng kiểm tra kỹ Mạch điện trước khi cấp nguồn, để tránh những hư hỏng đáng tiếc.3) Cấp nguồn đúng Thông số Điện áp ghi trên Bo mạch
4) Chú ý: Không bảo hành các trường hợp như sau:
- Không bảo hành cháy, nổ Vi xử lý, Sim, linh kiện trên bo mạch...
- Sử dụng không đúng điện áp...- Các tác nhân hàn, cậy, làm biến dạng mạch...
------------------------------------------------------------------------------------------1- Trên 90% Đơn hàng không phát được là do Bưu tá không liên lạc được với KH. Nên Quý khách vui lòng nghe máy để thuận tiện việc liên lạc giao hàng. Hoặc nếu có thể, KH nên bổ sung thêm 1 số điện thoại dự phòng khi đặt hàng2- Khuyến khích KH đặt hàng với giá trị lớn hơn 50.000 vnđ (Chưa bao gồm cước phí vận chuyển) vì khi khách hàng đặt ít quá, nhưng tiền cước lại cao hơn tiền hàng, gây khó xử cho người bán lẫn người mua3- Những đơn hàng ghi không đầy đủ thông tin Người nhận (Họ tên, Địa chỉ đầy đủ, Số điện thoại) chúng tôi xin từ chối xử lý4- Chỉ sau khi gọi điện xác nhận được với quý khách chúng tôi mới bắt đầu gửi hàng, trừ những đơn hàng đặt trên các sàn TMĐT5- Quý khách sẽ nhận được hàng sau 2-3 ngày (gửi nhanh) hoặc 4-7 ngày (gửi thường) tùy độ xa vùng miền. Những đơn hàng nào quá thời gian chúng tôi cam kết với quý khách, xin quý khách vui lòng liên lạc lại ngay với số điện thoại: (028)6.264.1482 để chúng tôi có thể kiểm tra và đốc thúc bên Bưu điện họ gửi nhanh hơn
Bigomart không trực tiếp bán sản phẩm bạn đang xem, nếu bạn đang quan tâm và muốn mua sản phẩm này, hãy nhấn vào các nút "Đến nơi bán" để đến trang bán chính thức của người bán.